Raleri Fogstop Visor Insert – Photochromatic-Raleri

• Raleri Fogstop Photochromatic is an innovative helmet antifog insert made in Italy.
• It does not require any pins for mounting & can be used during day as well as night without any optical distortion.
• Raleri Anti-fog insert can used safely on almost all helmet visors with or without pinlock pins.
• Raleri Fogstop Photochromatic insert sticks using a special adhesive sealant which ensures that no dust enters between the insert and the visor.
• Clear in normal condition, light green when exposed to Sun / UV rays
• Stick-on type – Sticks on visor inner using high quality glue
• Can be used during day as well as night
• 100% optically correct film with no visual distortion
• Fits on most of the helmets with or without pins (check size before ordering)
• Antifog + Photochromatic (Sun Protection)
• Tested as per European standard EN 166 7.2.3
• Dimensions – 27 x 8 cms
• Not recommended for riders with spectacles or lens.

Benefits of Raleri Fogstop Clear :

• Last longer than Pinlock
• Uses a patented glue sealing system
• 100% Made in Italy – High quality distortion free insert
• Does not damage the visor by preventing any dust or dirt going in between the visor and the insert
• Tested for antifogging properties as per European standards
• Photochromatic insert offers antifog + sun protection

Specification:

• Weight : 0.1 kg
• Dimensions : 27 x 8 x 1 cm
• Generic Name/Net Qty. : Helmet Antifog / 1 nos.
• Contents : Photochromatic Antifog Insert – 1 nos.

Fits On: Raleri Fogstop inserts will fit on almost all helmets with or without pinlock pins. Below are the list of helmets that we have installed the Raleri insert:

• Bell – MX9, Bell Qualifier
• Klim Krios Pro
• Axis Wolf DS
• Airoh – Commander, Valor
• Scorpion – EXO series
• HJC – RPHA11
• AGV – KI & K3, Sports Modular
• Schuberth
• C4
• RE – Escapade
• MT – all new and old models (Hummer, Thunder3, Thunder4, Blade, Revenge)
• KYT – TT Course & NFR series
• LS2 – FF800 Storm series, FF320 Scape & Stream Series, MX436 Pioneer Evo, FF902Scope, FF324 Metro Evo, FF327 Challenger, FF805 Thunder Plus, MX701 Explorer
• Axor – Rage, Rage Carbon series
• SMK – Titan series
• NHK – GPR Tech
• Fly Racing – Revolt
• Studds- Thunder

Raleri Fogstop Installatio Procedure:

• Carefully remove the visor from helmet and neatly clean the inside of the helmet.
• Remove the white tape on one side of the Raleri insert.
• Widen the visor slightly (to make it flatter) and gently stick the insert from one side of the visor. Let the visor come back to its original shape. Do not press the insert.
• Check if the insert is properly aligned vertically and horizontally. If not you can remove and start again.
• Once successfully installed, run your finger all along the adhesive to ensure there are no air bubbles and the insert is sealed from all sides.
• Remove the protective plastic cover and install the visor on the helmet

About Raleri Brand:
Raleri FogStop visor inserts, designed and made in Italy, are the best every antifog insert available because its anti-moisture system is both absorbent and draining. Raleri has achieved the best optical quality thanks to the special materials they use. Install onto the visor precisely by following the instruction given on the packaging and voila, you’re good to go. Raleris special gaskets also improve the antifog effect creating a sealed air chamber between insert and visor. Suitable for all visor colors